One Mash, Two Taps: Why Small Brewers Are Splitting the Difference Again
Photo: JIP, CC BY-SA 4.0, via Wikimedia Commons
Parti-gyle sounds like something you would need a footnote for. In practice it is one of the oldest tricks in brewing: make one mash, then use the runnings at different strengths to produce more than one beer. The first runnings are rich and heavy with sugar. Later runnings are thinner. A brewer can send the first to a strong ale, the later to a table beer, or blend portions to hit two or three targets. No extra grain, no second mash, just a more careful conversation with the mash tun.
For a generation of British craft brewers raised on single-recipe, single-strength brewing, that sounds suspiciously like making do. But a handful of small breweries are looking at it again in 2026, not as a nostalgia trip but as a way to get more beer—and more character—out of every sack of malt.
The mash tun does two jobs
The technical bit is straightforward. When you mash in, hot water meets crushed malt and converts starch to sugar. The first wort you drain is concentrated. Sparge again and the second wort is weaker. In a parti-gyle brew, those worts are kept apart, boiled separately, hopped differently and fermented to different strengths. Some brewers blend a little of one into the other to fine-tune gravity; others keep the split clean. The point is that one grist can produce two distinct beers rather than one beer and a lot of wasted extract.
It is not a free lunch. You need kettle space, fermenter space and a sales plan for both beers. A strong ale might take longer to condition. A table beer has to be clean, hoppy and refreshing enough that people order a second pint, not just a polite half. If the small beer tastes like the tail end of a brew day, parti-gyle is just an efficient way to make a disappointing product.
Why the old split is getting a second look
The business case is easy to see. Malt, energy and labour all cost more than they did a few years ago. A brew day that yields one strong beer and one low-strength beer spreads those costs across two revenue streams. For breweries with a taproom, that second beer is not a problem to be sold through distant wholesalers; it is a fresh, low-ABV option for the person who wants another pint without falling off their stool.
There is a creative case too. Parti-gyle forces a brewer to think about balance rather than just scaling a recipe up or down. The first runnings might be too syrupy for a session beer, so they go into something stronger. The later runnings might be too thin for a stout, so they become a hoppy table beer with a big dry hop and generous carbonation. It is the kind of constraint that can make a brewery more interesting, not less.
Two breweries making the split work
The Kernel in London is the obvious modern reference point. Its Table Beer has long been a benchmark for low-strength British brewing: full of hop aroma, dry, drinkable and completely without the apologetic malt-water feel that ruins so many small beers. The brewery has used later runnings to build low-strength beers in the past, and the result is a useful reminder that a table beer can be a destination rather than a by-product. It is not a gimmick. It is a beer you would order even if it were not the sensible option.
Harvey's in Lewes comes at the same idea from the traditional end. Its brewhouse is one of the UK's great old working breweries, and the idea of multiple runnings is part of the furniture rather than a craft-beer novelty. The exact recipes are the brewery's business, but the principle is familiar: a stronger wort and a smaller wort can be siblings, not accidents. Harvey's mild and bitter have long sat in a family of beers that taste like they belong to the same place. That is the quiet advantage of parti-gyle. It gives a brewery a house character that runs across strengths.
A third example is less about a single brewery and more about a pattern. Several small UK brewers have been running trial batches where the first runnings go into a strong pale ale or old ale and the second runnings become a 2.8% to 3.5% table beer. Some are selling them as a pair in the taproom; others put the small beer into kegs for local trade and keep the strong beer for bottles. The details vary, but the logic is the same: one mash, two conversations with the customer.
The catch is the sales mix
Parti-gyle only works if both beers have a home. A strong ale that sits in tank for months ties up cash. A table beer that nobody orders is just a low-margin fermenter filler. The breweries making it work tend to have a direct route to market—a taproom, a bottle shop, a cluster of local pubs that trust them. They can sell the small beer fresh and keep the strong beer for the slower months. They can also tell the story on the bar: same mash, different strengths, two beers that are meant to be tasted side by side.
That story matters. Parti-gyle is not a marketing invention, but it is a good marketing truth. Drinkers like the idea of a brewery getting more from less, especially when the beer in the glass is good. It sounds like craft rather than accounting. And in a UK beer market that is still crowded and still cost-sensitive, a bit of old alchemy is more welcome than another identikit IPA.
More from the same sack
The return of parti-gyle is not a revolution. It is a quiet recalibration. It will not suit every brewery, and it will not fix a business that cannot sell the beer it already makes. But for small brewers with a flexible brewhouse and a taproom full of regulars, it offers something useful: a way to make two beers with different jobs from one grist, and to make the second beer taste like it was planned rather than scraped together.
That is the part worth watching in 2026. Not the nostalgia, not the technical flex, but the discipline. Parti-gyle asks a brewer to think about the whole mash, not just the first runnings. In a market where every sack of malt has to earn its keep, that is a lesson worth re-learning.